#ACTIONTEC MOCA HOW TO#
#ACTIONTEC MOCA INSTALL#
#ACTIONTEC MOCA MANUAL#

therefore the order above is very important. this locks the operational frequency of the moca network not allowing the 6200q to get into the network. The bolt was set to 'use this dvr to create a moca network. Power up the bolt, you may have to go back to the network settings and connect using moca.ħ. give them extra time for the moca network to get established.Ħ. power up the 6200q next to the 6782 just as instructed, pair them, then move the 6200q to its desired location and power it up. Power the entire network down including the 6782.ĥ. The 6782: disable privacy, set operational frequency to scan.ģ. Set the bolt to 'connect using moca' and 'auto channel'.

#ACTIONTEC MOCA HOW TO#

I have a network diagram in pdf, just need to figure out how to get it up into here.ġ. The Tivo system was running fine even on the 1000 Mhz splitters, it was running 1150 when the TiVo was the moca network. The cable installation is all new but I did have to replace their 1000 Mhz broadband splitters with the 1675 Mhz splitters. The cable company 'Cable One' wants the modem on that first splitter which kinda makes sense. The POE is installed on the main incoming cable on the inlet to a two way splitter, one of those outlets goes to the 6782 and the other goes to the inlet of a 4-way splitter then those outlets run to various outlets in the house. The 6200 has been plugged into a mini outlet and then split right at the 6782, no moca.

We changed that, just joined the moca network with the channels set to auto, We went through all the channels on the 6782 and powered down the extender each time, no moca light. The TiVo bolt was creating the moca network. Ok guys we have tried everything you suggested, but. You only would need one of the Actiontec Bonded MoCA adapters if you want to maximize the speeds to and from your extender.ĮDIT: I currently have my setup with the Yitong MoCA 2.0 adapters I got off of Amazon, but I can switch one out and put in a MoCA 1.1 adapter if we can't figure out what the issue is.I am thinking it is something on your Motorola gateway going in though. I do know that the Actiontec network extender will work with other adapters including MoCA 1.1 adapters, I just re-tested one of mine but I currently have standard MoCA 2.0 adapters right now. If you get a MoCA connection somewhere in the process, start powering up your Tivos and check them. If that option is not available, try setting it to the highest channel, then reboot the Actiontec, if no luck, try the next lowest and so on.

#ACTIONTEC MOCA MANUAL#

I can't tell by looking at the online user manual if you can choose 'auto' for the MoCA channel on the 6782 for certain. If so, then power on your Tivos and see if they will also connect. If you can set the MoCA channel on the sbg 6782-ac to 'auto' and then first power up your Actiontec WCB6200Q and see if you can get a MoCA connection. How did you configure your Tivo DVR to 'connect to a MoCA network' or 'create a MoCA network'? Use the 'connect' setting on the Tivos. Can this have anything to do with it?Ĭan anybody help me, I feel it is something that needs to get set properly in the 6200Q but Actiontec tech support says no and they will not help with the issue anymore uless I get the bridge. I notice the 6782 is running the moca network at 1150 Mhz, if I try swithing to scan or any other frequency the TiVo system goes down. Why? when everthing is already a moca device.

#ACTIONTEC MOCA INSTALL#

Actiontec stated I need to install an ecb6200 moca adapter to fix the issue. Now: Talked with both Motorola and Actiontec, this was back and forth deal but to no avail, there is still no solution. Installed the 6200 next to the 6782 and patched them together with Ethernet, the extender was able to wifi to the internet. there is an available coax outlet in the middle of the living room where I want to install it, but no matter where I put it, no moca light and no internet on the Actiontec, purchased a second 6200q just in case the first was faulty, same-same, no moca light, no internet. I purchased an Actiontec wcb6200Q wifi extender. Network is solid, everthing listed above is straight up moca installation. POE is installed, Holland moca splitters, all new coax cable. I have a Tivo bolt, two minis, Arris surfboard sbg 6782-ac cable modem/router.

Actiontec moca